Enzo 1 anno fa
parent
commit
03fc6748c2
1 ha cambiato i file con 208 aggiunte e 0 eliminazioni
  1. 208 0
      test/test4.ts

+ 208 - 0
test/test4.ts

@@ -0,0 +1,208 @@
+/*  -----------------------       TEST4 {Mongo to Mongo}    -----------------------   */
+/* Same with test 3 but this one will be working with CDMS or any other potential data. */
+import * as mongoose from 'mongoose'
+import { Observable, map, Subject, takeUntil, take, of, timer, from } from "rxjs";
+import { ErrorTrigger, MessageSynchronisationServiceSetting } from "../type/datatype";
+import { StreamingService } from "./test-streamOBS";
+import { MessageAuditorService } from "../services/message-auditor.service";
+import { LoggingService } from "../dependencies/fisloggingservice/interface/export";
+import { BaseMessage, ResponseMessage } from "../dependencies/fisappmessagejsutilty/interface/export";
+import { LogSetting } from "../dependencies/fisloggingservice/type/datatype";
+
+/* Pre - Defined Data && Settings */
+// This service will stream the messages from the local testRequest.json messages
+// into the designated location that will be specified later.
+const stream = new StreamingService()
+
+/* Using the instance of the streaming declared earlier, we feed 4 messages into the
+subscribers that are going to subsscribe to this source_payload. Please note that 
+source_payload will emite the messages stream from the instance of stream service
+and further feed them into the other Subject which is called source_payload_subject. */
+const primary_sync = new MessageAuditorService()
+const primary_Log = new LoggingService()
+const primary: Subject<BaseMessage> = new Subject()
+primary.subscribe((e) => {
+    console.log(`Primary Received ${e.header.messageID}`)
+})
+
+/* Same thing as the above. The only difference is the we feed only 2 messages 
+to simulate streaming error. We want to see if it will sync the other 2 later 
+on. But generall the declarative structure is the same as the above. */
+const secondary_log = new LoggingService()
+const secondary: Subject<BaseMessage> = new Subject()
+secondary.subscribe((e) => {
+    console.log(`Secondary Received ${e.header.messageID}`)
+})
+
+
+/* Declare the designated database. I am using windev's mongo storage to store the data.
+Hence here, is the block that definte the target and it's associated specifications.
+This will be the target and will receive the predefined set of data to be logged as 
+prepared earlier in the code above.s */
+let publisher_storage: LogSetting = {
+    cacheMessageLimit: 0,
+    storage: "MongoDB",
+    setting: {
+        appName: 'Default from client',
+        appLocName: 'To be generated in client',
+        logLocName: 'To be generated in client',
+    },
+    customSetting: {
+        server: "192.168.100.59:27017",
+        database: "primary"
+    }
+}
+
+/* Same as above. Also declaring another designated database. But this one will be used
+as the target for synching. For such I purposely push only half the of the completed 
+dataset in order to test out the sync later. I am using my own cloud atlas mongo
+database on this. The address can always be changed. */
+let subscriber_storage: LogSetting = {
+    cacheMessageLimit: 0,
+    storage: "MongoDB",
+    setting: {
+        appName: 'Default from client',
+        appLocName: 'To be generated in client',
+        logLocName: 'To be generated in client',
+    },
+    customSetting: {
+        srv: true,
+        user: "testDB",
+        password: "h1nt1OyXw6QeUnzS",
+        server: "cluster0.29sklte.mongodb.net",
+        database: "secondary",
+    }
+}
+
+// Combine source and target storage to form MessageSynchronisationServiceSetting
+let settings: MessageSynchronisationServiceSetting = {
+    incomingSource: {
+        //all of the settings to be combined here
+        ...publisher_storage,
+        tags: ['Incoming']
+    }, //LogSetting & {tags:string[] },   
+    target: {
+        ...subscriber_storage,
+        tags: ['Incoming']
+    }  //LogSetting & {tags:string[] }  
+}
+
+/* -------- SYNCHRONIZATION --------- */
+// This is where the real test begin. THe process before this were merely just configuring 
+// the settings of where to sync. Here the initial intialize data will first log the 
+// messages into the designated database as specified earlier.
+function initializeData() { // To store the data into the designated databases.
+    primary_Log.init(publisher_storage).then(() => {
+        primary_Log.subscribe(primary) // Logging only occurs here
+    })
+    secondary_log.init(subscriber_storage).then(() => {
+        secondary_log.subscribe(secondary) // Logging only occurs here
+    })
+}
+
+// Done by appoximately 5-8 Seconds
+// initializeData() // Call the function to store the data into the designated databases.
+primary_sync.init(settings)
+
+/* This is where the synchronization logic is called. The errorSubject will act as a trigger
+mechanism to execute the synchronization. */
+let errorSubject: Subject<ErrorTrigger> = new Subject()
+// Subscribe to errorSubject notification 
+let sync = primary_sync.subscribe(errorSubject)
+sync.subscribe({
+    next: (msgToBeSynchronized) => {
+        console.log(`passing missing message: ${msgToBeSynchronized.header.messageID} into target/secondary subject.`)
+        // the missing data returned will be pushed (next(message)) into the target payload.
+        secondary.next(msgToBeSynchronized)
+    }
+})
+
+
+
+// Set time oout for 5 seconds to allow the initial logging stage to complete it's logging
+// implementation first before proceedint to trigger the sync
+setTimeout(() => {
+    // This wil act as the trigger error.Although the definition of this error is 
+    // still subject for enhancements in the near future.
+    let sampleError: ErrorTrigger = {
+        status: 1,
+        message: "NO. I dont want to work"
+    }
+    errorSubject.next(sampleError)
+}, 10000)
+
+/* THis is testing for generating error message to be fed into the error subject
+to act as additional trigger to exectute the synchronization when there's no internet
+connection. */
+const dns = require('dns');
+
+// Function to check internet connectivity. Basically just look up the site of example.com
+// using the built in libray of DNS.
+function checkInternetConnectivity() {
+    dns.lookup('example.com', (err) => {
+        if (err && err.code === 'ENOTFOUND') {
+            let errorMsg: ErrorTrigger = {
+                status: 0,
+                message: `No internet connection`
+            }
+            errorSubject.next(errorMsg)
+        } else {
+            // Emit a message indicating internet connectivity
+            // console.log('Internet connection is available');
+        }
+    });
+}
+
+// Interval time (in milliseconds) for checking connectivity
+const intervalTime = 1000; // Check every 1 second
+
+// Start checking connectivity at intervals
+const interval = setInterval(checkInternetConnectivity, intervalTime);
+
+// Stop checking connectivity after a certain duration (e.g., 1 minute)
+const duration = 60000; // 1 minute
+setTimeout(function () {
+    clearInterval(interval);
+    console.log('Internet connectivity monitoring stopped');
+}, duration);
+
+function countdown() {
+    let seconds = 0;
+    const countUpInterval = setInterval(() => {
+        console.log(`Elapsed seconds: ${seconds}`);
+        seconds++;
+    }, 1000); // Update every second (1000 milliseconds)
+}
+
+countdown()
+
+
+const Schema = mongoose.Schema;
+const fingerPrintSchema = new Schema({
+    uuid: { type: String, required: true, lowercase: true, unique: true },
+    fileName: { type: String, required: true, lowercase: true },
+    fileType: { type: String, required: true, lowercase: true },
+    entityName: { type: String, required: true, lowercase: true },
+    fileData: { type: Object, required: true },
+});
+
+function convertDataInMongo(url: string) {
+    let data: Subject<any> = new Subject()
+    let convertService = new LoggingService()
+
+    let dbConnection = mongoose.createConnection(url)
+    let dataModel = dbConnection.model('genericdata', fingerPrintSchema)
+    dataModel.find().then((res) => {
+        // console.log(res)
+        res.forEach((element) => {
+            data.next(element)
+        })
+    })
+
+    data.subscribe((element) => {
+        convertService.
+    })
+}
+
+convertDataInMongo('mongodb+srv://testDB:h1nt1OyXw6QeUnzS@cluster0.29sklte.mongodb.net/test')
+convertDataInMongo('mongodb://192.168.100.59:27017/hq')